Ideal Response were called in to asses the extent of the damage following a fire at a branch of the national supermarket, Co-Op, and to carry out the required cleaning, repairs and restoration in terms of fire and smoke damage.
As licenced waste carriers, we were also requested to dispose of all unsalvageable industrial refrigeration units in accordance with guidelines outlining proper methods for dealing with CFC’s (chlorofluorocarbon or fluorinated greenhouse gas). Fluorinated greenhouse gas, or ‘F gas’, is found in refrigeration units and should be treated as a hazardous waste material.
Our initial assessment found that brickwork, electrical equipment, cabling, furnishings and flooring were all severely damaged. As soot and ash can be extremely acidic and corrosive, it was imperative that we started work as soon as possible to minimise secondary damage.
As part of preparing the area for remedial works, we allowed for scaffolding and provided a generator for power and temporary lighting to enable work to progress as quickly and safely as possible.
The extent of the works meant that we would be working in partnership with other service providers, as part of a collaborative approach. This meant the least disruption to the client as work would be completed in the minimal timeframe possible.
The Technical Part
A full risk assessment was carried out then safety precautions put in place to allow safe access to the store room area for the staff.
When thinking of smoke and fire damage, people often forget the water damage caused by the fire fighting attempts. So, before the remedial work could begin, we first had to ensure that the building and affected areas were dry.
To enable this, services were disconnected and our desiccant dehumidifiers were installed to ensure the building was adequately dry in preparation for remediation. Our desiccants are more effective than a standard dehumidifier and come with advanced remote monitoring equipment. This enables our technical team to monitor moisture levels, the amount of water vapour removed, and equipment health, all in real-time.
Structural work began at the outset. A lean-to outbuilding was removed and a breeze block CCTV room was also dismantled and removed. The existing checker plate floor covering needed to be lifted and partition walls knocked down. The structure needed to be cut back to the party wall to allow fire-damaged timber to be replaced. All fire-damaged walls were stripped back to bare brick in preparation for soot and smoke removal work.
The fire cleaning method used on this project was Soda Blasting. Soda Blasting removes smoke stains, soot and char quickly and efficiently while acting as a mild deodorizer. This process works by using compressed air coupled with sodium bicarbonate at a relatively low pressure of around 20psi to apply mild abrasive force to affected surfaces. This method brings buildings back to their original state, leaving little to zero trace of a fire.
After completing the Soda Blast treatment, we applied our solvent-free, water-based bonding agent to affected porous surfaces. This creates a permanent, sealed barrier locking in any remaining smoke odour particulates.
The scheduled work was to be completed within a three week period and Ideal Response provided continuous support to ensure that deadlines were met.
Our clients were pleased with the service they received and our ability to overcome difficulties quickly, commenting:
“All work carried out to a good standard. Although the team encountered some problems with their equipment, they resolved issues effectively. Overall, very happy with the operatives and the job.”